Skip to main content

Mesh Up: HD Render

Vase Timer Render Photos
     This is my vase timer prior render. The green piece was supposed to be more transparent but I couldn't get it to show up as well as I wanted it to be. There's a red clock hand under the aqua tinted glass, which I showed through some of my renders without the glass piece. 


    
    


 
 

Labels:

Comments

Post a Comment

Popular posts from this blog

3D Printed Object: Hybrid Design

Concept Generator: These were the outcomes of what I had for generating concept, some of mine wouldn't fully work when I really thought of how the 3D printer worked. Only the flat coned shape and 3 rings fully worked, and it matched with my groups' the most since their shapes were mainly in a cylinder-like.     Combining Group Objects: I was in a group with Adam and Siwon. Out of our three designs, Adam's had the more sturdy base design so the 3D Printer could hold everything together. Siwon's design was a more decorative angled vase shape, like diamond-cut edges. My design, placing it into Slic3r separately, I could tell the rings immediately didn't look as sturdy as we wanted. So mine has the most changes or reconsideration in how that would end up printing. We had to make sure the rings interlock with the base and each other so that the printer would keep everything into one piece without falling apart mid-print.  Initially, we had Siwon's in t...
Post a Comment
Read more

Reverse Engg Object: HD Render and Exploded View

     This reverse engineering project was about learning the tools of rhino by creating an object of our choice digitally. Using a calliper and precise measurements, we were to create a replica of a mechanical object to be pretty much exact. With the limitations of no organic or soft objects, no weapons, and must be complex/simple enough to finish within the three-week frame.      I chose an old pair of scissors as my object to replicate. It started out simple, though it was harder than I thought to wrap my head around a pair of scissors than I thought. Maybe it was because I had a year break in between last year's 3D modelling and rendering, but for the smallest things, I couldn't process for hours. This project took at least 11.5 hrs to do. I got stuck in some places like the angled blade, curvature of the handles, and finding the smallest slip-ups that caused an open shape. I know I had drawn some parts separately but when I tried to assemble them and bo...
Post a Comment
Read more

4. Parametric Furniture Scale Model (Physical) (iii)

This is my physical print, it was done with clear acrylic laser-cut pieces glued together with crazy glue. (At the end there's a 3D print version!) So I laid out 32 pieces to laser cut which I thought was enough, but it surprisingly still too thin compared to my rendered file. Which is fine because the table is suppose to be adjustable for width, angle height, and amount of curves/grooves/waves. And glueing it together wasn't perfect either because some pieces wanted to shift right before the glue dried so it created a wavy shape in every other angle too... yay... And some of the pieces were cut on a non-flat surface of the acrylic, which is weird I didn't know that could have been an issue until now. I glued together pieces 2 by 2 then join those to 4 by 4, then 8 by 8. At this point is where I found the issue, where there were random gaps in between the laser-cut pieces (see pictures below) and no matter how much I try to sand the edges, it would not go together. Thats ho...
Post a Comment
Read more